| Gear Technology Magazine

geartechnology.com And Other Adventures

July 1, 1996

You've been reading about it, talking about it, maybe even trying it. Gear Technology has jumped aboard it feet first and begun a voyage on the World Wide Web. Beginning with this issue, an electronic version of the magazine will be online. For those of us who still find the fax machine amazing technology, this is a great leap.

Gear Technology User's Guide to IMTS '96

July 1, 1996

IMTS: It can be the best of times or the worst of times. The best because nowhere will you find more equipment, products and services for your business than at McCormick Place, Chicago, in September; the worst because finding your way around the show and around the city can be a hassle.

Noise Reduction in Plastic & Powder Metal Gear Sets

July 1, 1996

The data discussed in this article was taken from an upright vacuum cleaner. This was a prototype cleaner that was self-propelled by a geared transmission. It was the first time that the manufacturer had used a geared transmission in this application.

Design Implications for Shaper Cutters

July 1, 1996

A gear shaper cutter is actually a gear with relieved cutting edges and increased addendum for providing clearance in the root of the gear being cut. The maximum outside diameter of such a cutter is limited to the diameter at which the teeth become pointed. The minimum diameter occurs when the outside diameter of the cutter and the base circle are the same. Those theoretical extremes, coupled with the side clearance, which is normally 2 degrees for coarse pitch cutters an d1.5 degrees for cutters approximately 24-pitch and finer, will determine the theoretical face width of a cutter.

Plastic Gear Design Basics

July 1, 1996

Plastic gears are serious alternatives to traditional metal gears in a wide variety of applications. The use of plastic gears has expanded from low-power, precision motion transmission into more demanding power transmission applications. As designers push the limits of acceptable plastic gear applications, more is learned about the behavior of plastics in gearing and how to take advantage of their unique characteristics.

Gear Noise As a Result of Nicks, Burrs and Scale - What Can Be Done

July 1, 1996

There are many different causes of gear noise, all of them theoretically preventable. Unfortunately, the prevention methods can be costly, both in equipment and manpower. If the design of the gear and its application are appropriate, in theory all that is necessary is to have a tight control on the process of producing the finished gear. In reality, there are many variables that can cause a process, no matter how well-controlled, to deteriorate, and thus cause errors, some of which will cause a gear to produce unwanted noise when put to use.

Gears Around the World (Wide Web)

July 1, 1996

More Gears in Cyberspace Dial in to the web site of Chicago's Museum of Science and Industry for an online version of the museum's Gears from the Century of Progress exhibit.