TOPICS CALENDAR BUYER'S GUIDE AGMA

Assembly

INDUSTRY NEWS | 2022-06-13

Universal Robots USA Offers E-Book on Cobots

Collaborative robots can increase output and improve quality in nearly any production environment. UR cobots can be deployed quickly, with fast ROI, typically within 12 months. Universal Robots USA has released an e-book on how cobots can assist on the shop floor in the following areas:

INDUSTRY NEWS | 2022-05-26

GROB Looks to Build Skilled Workforce

GROB Systems, Inc. has announced it will host a 2022 Apprenticeship Class orientation and signing day on June 4th, 2022, from 9:00 a.m. – 12:00 p.m. at the company’s U.S. headquarters, 1070 Navajo Drive, Bluffton, Ohio.

INDUSTRY NEWS | 2021-04-26

ANCA Provides Complete Skiving Cutter Solution for EV Transmissions

ANCA's TX and MX machines offer skiving cutter sharpening

ASK THE EXPERT | 2015-06-01

Gear mesh, NVH Evaluation

The question is quite broad, as there are different methods for setting various types of gears and complexity of gear assemblies, but all gears have a few things in common.

ASK THE EXPERT | 2015-05-01

Gear Mesh Assembly

When assembling a pair of gears, what is a good method for setting and checking their mesh?

ASK THE EXPERT | 2014-08-01

Importance of Contact Pattern in Assembly of Bevel vs Cylindrical Gears

Why is there so much emphasis on the tooth contact pattern for bevel gears in the assembled condition and not so for cylindrical gears, etc?

TECHNICAL ARTICLES | 2013-06-01

How to Design and Install Bevel Gears for Optimum Performance - Lessons Learned

Bevel gears must be assembled in a specific way to ensure smooth running and optimum load distribution between gears. While it is certainly true that the "setting" or "laying out" of a pair of bevel gears is more complicated than laying out a pair of spur gears, it is also true that following the correct procedure can make the task much easier. You cannot install bevel gears in the same manner as spur and helical gears and expect them to behave and perform as well; to optimize the performance of any two bevel gears, the gears must be positioned together so that they run smoothly without binding and/or excessive backlash.

FEATURE ARTICLES | 2013-05-01

Job Shop Lean - Assembly

The Tiger Team from Hoerbiger looks for ways to cut waste and improve throughput in the company's assembly cell.

TECHNICAL ARTICLES | 2013-01-01

Balancing: Smoke and Mirrors No Longer

By virtue of collected anecdotal accounts, equations and problem solving, balancing is discussed as more math and common sense, and less smoke and mirrors.

TECHNICAL ARTICLES | 2012-09-01

Refurbishing a Ball Mill ; Bevel Gear Backlash

Our experts comment on reverse engineering herringbone gears and contact pattern optimization.

TECHNICAL ARTICLES | 2012-03-01

Ask the Expert - Bevel Gear Mounting

I am currently writing a design procedure for the correct method for setting up bevel gears in a gearbox for optimum performance...

TECHNICAL ARTICLES | 2006-01-01

Assembling Spiral Gears: Double Taper Can Be Double Trouble

Bevel gear systems are particularly sensitive to improper assembly. Slight errors in gear positioning can turn a well-designed, quality manufactured gear set into a noisy, prone-to-failure weak link in your application.

TECHNICAL ARTICLES | 1990-07-01

Transmission Errors and Bearing Contact of Spur, Helical, and Spiral Bevel Gears

An investigation of transmission errors and bearing contact of spur, helical, and spiral bevel gears was performed. Modified tooth surfaces for these gears have been proposed in order to absorb linear transmission errors caused by gear misalignment and to localize the bearing contact. Numerical examples for spur, helical, and spiral bevel gears are presented to illustrate the behavior of the modified gear surfaces with respect to misalignment and errors of assembly. The numerical results indicate that the modified surfaces will perform with a low level of transmission error in non-ideal operating environments.